Ocamo Yongnuo 1 x YN-622N-TX + 2 x YN-622N RX i-TTL LCD Wireless Flash Controller Wireless Flash Trigger Transceiver For Nikon D70 D70S D80 D90 D200 camera
Ocamo Yongnuo 1 x YN-622N-TX + 2 x YN-622N RX i-TTL LCD Wireless Flash Controller Wireless Flash Trigger Transceiver For Nikon D70 D70S D80 D90 D200 camera by Ocamo at Salt Lake City Wedding Video. MPN: YJJ0521laochanpin-282F2F8F12. Hurry! Limited time offer. Offer valid only while supplies last. Function LCD screen display, multi-buttons quick operation The firmware can be upgraded through the USB interface Support wireless shutter release
LCD screen display, multi-buttons quick operation
The firmware can be upgraded through the USB interface
Support wireless shutter release function
The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately
Equipped with the AF focus assist light (can be disabled)
Grouping flash mode: i-TTL/Manual flash/Super sync
Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode
The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately
Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s
Support exposure compensation, flash value lock function(FVL)
Fimrware upgrade instructions:
1. When you prepare to upgrade YN-622N-TX first time, please download the driver and software package YN_Trigger_Updater.zip, uncompress it and run YN_Trigger_Updater_Setup.exe to install the driver/software.
2. Download the most update firmware package and unzip it.
3. Turn off YN-622N-TX, keep pressing mode button and turn on it again. The screen will show firmware upgrade interface . Connect the device to your PC via a USB cable.
4. Run YN_Trigger_Updater from start menu. Click on quot;Browse...quot; Button and navigate to the firmware you download in step 2. Wait a few seconds until the device is detected. Click on quot;Updatequot; to begin. When is done, YN-622N-TX will be reset automatically and you can use the new version now.
5. If any error is encountered when updating, please turn off and try again from step 3.
1 x YN-622N-TX Controller
2 x YN-622N Receiver
1 x User manual
2 x LS-2.5/N(1 and 3) Shutter Connecting Cable